Specification: Element: $34 Pressure Gradlent Transducer Polar Pattern: Unl-directlonal Frequency Response: 20Hz-20KHz Sensitivity: -34dB ±2dB (0dB=1V/Pa at 1KHz) Output Impedance: 1500 ± 30% (at 1KHz) Load Impedance: ≥ 1000Ω Equivalent Nolse Level: 16dBA Max. SPL: 130dB (at 1KHz ≤1% T.H.D) S/N Ratlo: 78dB Electrical Current: 3mA Net Weight: 346g Body Dimension: $46X150mm [3:08 pm, 12/12/2025] Akansha Rohini Staff: Usage: 1. Tum on your amplifier or mixing board and set the volume control to minimum position, To connect the phantom power to the microphone tuming on the phantom switch, accommodate the volume control from low to high so obtained effect to your moderate level for protected the sauna from pounding. 2. If the head of the microphone is covered by hand or brought close to the speaker, a howling sound may be generated to prevent this, first decrease the volume, then place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and speaker. 3. The sensitivity of cartridge is very fine, Don't drop, hit or apply strong shock to it. 4. To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures. bm 8000 condenser microphone bm 800 condenser microphone setup bm 800 condenser microphone review condenser microphone bm 800 condenser mic bm 800 condenser bm 800 review bm-8000 condenser microphone set unboxing condenser microphone bm 800 setup professional condenser microphone bm-800 bm 800 condenser microphone how to use bm-800 condenser microphone full studio setup dm condenser microphone set dm condenser microphone micrófono condenser lane bm800 microphone bm 800 condenser bm 800 condenser microphone laptop setup88% bm condenser microphone bm 800 condenser microphone with phantom power condenser microphone recording bm 800 condenser microphone with sound card bm 800 condenser microphone to mixer